DAF LF has the grit and determination for Econ Engineering

22-07-2020, DAF Trucks UK


  • Econ Engineering receives eight DAF ‘Construction’ LF 260 18-tonne 4x2 rigids with extended day cabs
  • DAF selected thanks to 10-tonne payload, generous spec and driver comfort
  • 7-cubic metre dry spreaders to service the M40 motorway under contract with infrastructure maintenance firm Egis Road Operation M40 Ltd
  • “The combination of payload, standard specification, chassis versatility, fuel economy, and then the deal through PACCAR Financial, meant DAF was the clear choice.” – Steve Sinnott, Econ Engineering

Econ Engineering

Econ Engineering Ltd. – the UK’s largest manufacturer of gritters and salt spreading vehicles – has taken delivery of eight new DAF LF 260 ‘Construction’ 4x2 rigid dry-spreaders with the extended day cab to service its customer contract with Egis Road Operation M40 Ltd.

Supplied through DAF Dealer, Lancashire DAF, and acquired through PACCAR Financial, the eight new dry spreaders will enter service with Egis to ensure the maintenance of the M40 motorway during the winter months. Full winter maintenance bodywork was designed and fitted by Econ, providing an impressive 10-tonne payload.

Vehicles feature a rear inspection platform with three-point contact access ladder providing maximum safety for the driver and crew, with full safety rails allowing load-bay inspection and body wash-out at the end of each shift. The spreader is controlled using Econ’s own Spargo Touch Control and E-drive navigation systems allowing the operator to control the spreader manually or, if required, allowing the E-drive to control the process through automated gritting on a pre-programmed route. Spreading capacity is road speed related to permit rapid deployment on the motorway up to 45mph.

Econ Engineering at Lancashire DAF

Steve Sinnott, Sales Manager, Econ Engineering Ltd., said, “DAF has a tremendous reputation when it comes to the quality of their vehicles and the aftersales support, too. When evaluating the fleet replacements, we looked at all available options and when it came down to the final shortlist, the combination of a 10-tonne payload, standard specification, chassis versatility, fuel economy, and then the deal through PACCAR Financial, meant DAF was the clear choice.

“Like all manufacturing businesses,” he said, “Econ has had to adapt its operations during the COVID-19 pandemic, but working with the Lancashire DAF team has ensured that despite the disruption, the new spreaders have been prepared and ready for operational use ahead of winter. Due to the special nature of the equipment, we will continue to provide round-the-clock service and maintenance of the vehicle bodywork thanks to our network of mobile engineers ensuring the trucks are always operational no matter the weather.”

Econ Engineering Vehicles

Econ Engineering boasts a fleet in excess of 800 vehicles, half of which are DAF, making them a proven performer in the harsh operating environments in which they are required.




GB DAF Approved Tachograph Centre ACS